model. no. rev. ningbo foryard optoelectronics co.,ltd add: no.115 qixin road ningbo zhejiang china zip: 315051 tel: 0086-574-87933652 87927870 87922206 fax: 0086-574-87927917 e-mail: sales@foryard.com ( general) http://www.foryard.com page 1/8 approved by applications: light strips lcd backlight decorative lighting prepared by interior automotive illuminations mobile phones product specification model no. FYLS-0402URC customer approved signatures smd type size (mm):1.0*0.5*0.35 checked by FYLS-0402URC a features: indicators rohs compliant smt package suitable for all smt assembly and soldering method http://www.foryard.com pb-free reflow soldering application emitting color:red new
model. no. rev. mechanical dimensions notes: 1. dimension in millimeter [inch], tolerance is 0. 25 [.010]. 2.the specifications,characteristics and technical data described in the datasheet are subject to chan ge without prior notice. page 2/8 model no. FYLS-0402URC http://www.foryard.com FYLS-0402URC a
model. no. rev. min. typ. 2.10 645 631 80 50% power angle --- 130 --- page 3/8 material / gold silicone note: 2.pay attention about static for ingan 1.luminous intensity is based on the for yard standards. chip if = 20ma algainp max 2.60 mcd deg material item reflector wire encapsulate 10 p d v u a nm nm if = 20ma vr = 5v if = 20ma if = 20ma if = 20ma luminous intensity iv v absolute maximum rating 30 ma ma reverse current symbol vf ir unit reflow soldering:250 /5sec reverse voltage mw -40oc +100oc soldering temperature vr tsol 5 power dissipation operation temperature topr forward current(dc) pd if 100 78 -30 o c +80 o c a symbol ifp peak forward current* *pulse width Q Q Q Q 1msec duty Q Q Q Q 1/10 peak emission wavelength dominant wavelength FYLS-0402URC model no. FYLS-0402URC items unit absolute maximun ratings(ta=25 o oo o c) tstg typical electrical &optical charcteristics(ta=25oc ) items forward voltage 2? condition storage temperature http://www.foryard.com
model. no. rev. typical eletrical/optical characteristics curves(t a=25 o oo o c unless otherwise noted) page 4/8 FYLS-0402URC a model no. FYLS-0402URC http://www.foryard.com algaas relative lumionous intensity(lop @max=1)
model. no. rev. packing diagram note: the specifications are subject to change with out notice. please contact us for updated informati on. page 5/8 model no. FYLS-0402URC a FYLS-0402URC http://www.foryard.com
model. no. rev. packing diagram note: the specifications are subject to change with out notice. please contact us for updated informati on. page 6/8 FYLS-0402URC a model no. FYLS-0402URC http://www.foryard.com foryard o p t o e l e c t r o n i c s led ledled led pn:fyls-xxxxx-xx qty:xxxxx pcs date:xxxx/xx/xx gw: xx kg nw: xx kg xxxxxxxxxx rohs rohs rohs rohs attention attention attention attention 0402 4000/reel 9 reels /box 6 boxes/carton qc: qc pass reel 1 1 . 5 30 18 . 5 foryard o p t o e l e c t r o n i c s www.foryard.com 39.0 3 8 . 0 3 2 . 0 outside label outside label
model. no. rev. precautions for use: page 7/8 required if the shelf life has expired 1. storage (2)reflow soldering temperature profile baking is required take the material out of the pac kaging bag before baking. do not open the oven door use a soldering iron of less than 25 watts is recom mended . the iron temperature must be kept below 3 15 handling of an smd led should be done only when the package has been cooled down to below 40 and soldering time no more than 2 seconds. the epoxy resin of an smd led should not contact th e tip of the soldering iron. no mechanical stress should be exerted on the resin portion of an smd led during soldering. model no. FYLS-0402URC http://www.foryard.com before opening the packaging , check for air leaks in the bag. FYLS-0402URC frequently during the baking process. 2. soldering (1) manual soldering with a soldering iron secondary protection a the shelf life of leds stored in the original seale d bag at <40 and < 90% rh is 12 months. baking is to prevent moisture absorption into smd leds during the transportation and storage , the leds are pac ked smd leds must be used within 24 hours. if the leds are not within 24 hours after removal from the bag , after the bag is opened, the smd leds must be store d at <30 and < 60% rh. under these conditions, in a moisture-barrier bag. desiccants and a humidit y indicator are packed together with the leds as peak temperature temperature pre-heat soak reflow cooling time melting-point
model. no. rev. page 8/8 high-brightness led light may injure human eyes. av oid looking directly into lighted led must be pre-qualified to avoid damage to t he smd leds. reflow soldering should not be done more t han one time the appearance and specifications of the product ma y be modified for improvement without notice. 3. static electricity esd shoe strap or an anti-electrostatic glove be us ed when handling the leds. when washing is required, ipa (isopropyl alcohol) s hould be used. all devices, equipment and machinery must be proper ly grounded 4. others static electricity and surge voltage damage the led s. so it is recommended that an esd wrist band, the influence of ultrasonic cleaning on the leds de pends on factors such as ultrasonic power and the w ay. is changed slightly an operating current and therm al. this device should not be used in any type of fluid such as water, oil, organic solvent and etc no stress should be exerted on the package during soldering. (3) recommend soldering pad design(unit=mm) duration above 217 is 80 sec. max preheat time:100seconds.max ramp-down rate:6 /sec.max peak temperature:250 http://www.foryard.com model no. FYLS-0402URC solder=sn63-pb37 average ramp-up rate:4 /sec.max peak preheat temperature:100-150 preheat time:100seconds.max ramp-down rate:6 /sec.max peak temperature:230 time within 5 of actual peak temperature=10 sec. max average ramp-up rate:4 /sec.max duration above 183 is 80 sec. max FYLS-0402URC a time within 5 of actual peak temperature=10 sec. max peak preheat temperature:100-150 solder= pb-free smd led should not be modified after solde ring. if modification cannot be avoided, the modifi cation reverse voltage should not exceed the absolute maxi mum rating on the data sheet. the colour of the le ds
|
